Jks 9904 User Manual download pdf (Page 4)

JKS part number

JKS DESCRIPTION Installation

4 Page

BODY MOUNT LOCATION DIAGRAM

 5. MODIFY RADIATOR

 Locate the four fan shroud mounting holes on the

radiator.

 Measure exactly 1” below the factory mounting

holes and mark the location with a center punch.

NOTICE: The lower passenger side hole will line up

with an existing factory hole and will not require mark-

ing with a center punch.

 Drill a new 1/4” hole through the three center

punched marks.

 6. MODIFY FAN SHROUD

It will be necessary to trim the fan shroud to clear the

lower radiator hose before mounting.

 Test t the fan shroud to the radiator by aligning

with the new mounting holes.

Mark the location where the lower radiator hose inter-

feres with the fan shroud.

 Trim the fan shroud until it completely clears the

radiator hose when mounted to the radiator.

 Check for interference between the fan shroud

and fan blades, or any other objects, and trim the

fan shroud accordingly.

 Re-install the fan using the original hardware, and

mount the fan shroud to the new mounting holes in

radiator.

 Secure the fan shroud to the radiator with four of

the 1/4” Nylock Nuts (H) provided. Use the sup-

plied 1/4” x 1” Fender Washer (G) at the existing

lower passenger side hole in radiator.

 7. MODIFY T-CASE SHIFT LINKAGE

It will now be necessary to modify the transfer case

shift linkage bracket that you removed in step 2.

 Remove the pivot bushing from shift linkage

bracket by removing the two mounting bolts.

 Install the supplied Pivot Bushing Drop Plate

(I) to the shift linkage bracket using the original

pivot bushing mounting bolts as shown.

1 2 3 4 5

No comments

Jks 9904 User Manual Page 4