Jks 9904 User Manual Page 5

  • Download
  • Add to my manuals
  • Print
  • Page
    / 5
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 4
JKS part numberJKS DESCRIPTION Installation
Page 5
Install the pivot bushing onto the Drop Plate (I) us-
ing the supplied 1/4” x 3/4” Bolts (F) and remaining
two 1/4” Nylock Nuts (H). Refer to the list below for
the correct mounting holes to use for your applica-
tion.
Motor
Mount Lift
Kit?
T-Case
Lowering
Kit?
No Yes Use Hole "B"
Yes Yes Use Hole "A"
No No Use Hole "A"
Yes No Do Not Use Drop Plate
Slide the linkage rod through relocated pivot bush-
ing and re-install shift linkage bracket to oor pan
using the original mounting hardware.
Check operation of the shift lever to ensure the
transfer case fully engages all ranges.
NOTICE: If necessary, adjust linkage between shift
lever and bell crank. If interference is experienced, it
may be necessary to trim the oor to provide suf-
cient clearance.
8. REPLACE RADIATOR BUMPERS
Remove the factory rubber bumpers from the un-
derside of the grill panel.
Apply a spray lubricant to the supplied Extended
Radiator Bumpers (J). Insert into original mounting
holes and use a twisting motion to install.
NOTICE: If the factory inverted U-bracket pictured
above restricts radiator bumper installation, it must
be removed. Remove bracket by cutting from chassis
using a suitable cutting tool.
9. POST-INSTALLATION
Check all mounting hardware to ensure it has been
correctly installed and tightened to factory torque
specications.
Check torque specications for all mounting hard-
ware after driving vehicle 50 miles, and after rst
time off-road.
Maintenance
Check all torque specications as part of regular ve-
hicle maintenance schedule.
After break-in period, Quicker Disconnects should be
lubricated regularly as part of vehicle maintenance
schedule.
Regular cleaning with pressurized water is recom-
mended to maximize ease of operation and reliability.
Always lubricate afterwards to evacuate any moisture.
©2013 JKS Manufacturing, Inc & Aftermarketing, LLC
Revision Date 3/15/2013
Page view 4
1 2 3 4 5

Comments to this Manuals

No comments